Used Egan extrusion coater laminator equipped with 54" diameter x 78” width web Egan turret unwind with automatic splicer, Fife edge guide system, #1 laminator with 24" chill roll space 3 roll laminator (CHILL ROLL NOT INCLUDED) , #1- 6" Egan extruder L/D : 30/1 with new barrel & screw in 2004 with 400HP extruder 8-900 kg/hr., Screen Changer but requires New or Refurbished Die, score edge trim slitting section, #2 laminator with new 24" chill roll space on 3 roll ( CHILL ROLL NOT INCLUDED), #2 - 6" Egan extruder L/D: 30/1 with new barrel & screw in 2003 with 400 HP extruder with 8-900 Kg/hr.& die, Screen Changer, requires New or Refurbished Die, Corona Treater, 52" diameter 1988 Black Clawson turret rewind with 1999 Somatec splicer, four (4) resin dryers with hot air & low dew point desiccant, gravimetric blending systems, all associated conveyance systems, spare rolls and spare parts. Machine well suited for 72” finished hi speed Woven or Nonwoven coating and laminating , products such as Tarpaulins, woven packaging, export quality roofing liner, pond liner all possible, coating range approx. 15 gsm to 60 gsm possible, PE/PP screws included, there are a total 14 extruder screws for various polymers, (asking price for machine is available just with the spare extruder screws and parts, worth over 500 k USD) , materials such as LDPE, HDPE, PP, LLDPE all possible with this versatile machine, lines speeds up to 250 + m/min possible with tandem output coating at 1500-1800 Kg/hr. on two stations. Line excludes all drives and controls, requires 2 chill rolls of choice finish and 2 refurbished dies. Seller can assist in sourcing and supplying both new chill rolls and new or refurbished dies, Additional unwind required for laminating. All electrical is best installed with 2018 components in Country of final destination, Seller can assist with securing local contractors to support electrical refit in Asia. Machine won’t last and must be seen to appreciate.