Browse used plastic and extrusion machinery for sale, including blown film lines, cast film lines, extruders, and recycling systems. Request a quote or contact margotsales@margot.com with your line type, web width, and output requirements.

Used PTi/Bandera HVTSE 70mm-52D five-layer sheet co-extrusion line for foamed PET, producing 43.31" wide sheet at 0.012" - 0.043" thick and 770 - 1,650 pph. Includes three extrusion systems, three-roll take-off, thickness measurement, cantilevered shaft winder with accumulator, transfer roll coater, trim recovery, and TITAN Plus PLC control on 460V/3Ph/60Hz. All PLC and HMI software has been backed up and will be included with the line. Subject to 13% Buyers Premium.

72" Cloeren EBR V automatic extrusion die (new in 2022, never used) with Autogauge 6254 lip adjustment system (1" centers), 72" lip slot width, multi-component deckle system, 0.025" nominal lip gap, stainless steel GemNi nickel-plated die bodies, seven thermocouples, lip heaters, spare parts; extrudes LDPE and EVA at 600–700 lbs/hr (900 max)

Brampton Engineering 150-24-ACE single layer blown film line, built Feb 2000, SN 17368-1. 1.5 in 24:1 extruder, 20 HP Allen-Bradley flux vector drive, 3 in spiral die, Uni-Flo dual lip air ring, tower, 24 in top nip, 24 in cantilever turret winder. Laboratory and pilot use. Disconnected and palletized, ready to ship. Operating video available.

Used Bruckner 3-layer BOPP film extrusion line (ABC, 2500 kg/h) with three extruders (200mm+250mm main, two 90mm Coex), 1054mm Simplas die (37 bolts, 7 zones), MDO, TDO (8500mm max width), two corona treaters, flame treater, 450mm rewind, 1988 Goebel Monoslit slitter, Simoreg drives, all spares.

Used Republic Machine model RM52-100-E-15-2-60D single shaft shredder, new in 2012, configured as a 52" wide x 60" long cutting chamber size reduction system for plastics with air discharge.

Used 2" Sterling extruder on carriage, 30:1 L/D, electrically heated/fan cooled, 25 HP Spectrum DC drive with blower, Barber Coleman heater controls, gearbox (13.95:1, 125 RPM), 63" centerline height, Whitlock vacuum receiver.

Used Davis Standard blown adhesive bubble line with 3.5" model 350S extruder (24:1, 75 HP DC motor), Extek hydraulic screen changer, custom blown film die with rotating air ring, 16" 2-position unwind with AccuWeb guiding, score slitting, 16" 3-position surface rewind, 480V/3Ph.

Used Bruckner 5-layer BOPP film extrusion line (ABCDE, 10–70 micron, 2500 kg/h) with five extruders (two 90mm, two 120mm single-screw, one 139mm twin-screw), Simplas die, Thermo Fischer thickness gauge, MDO, TDO, two Mero corona treaters, 6600mm turret rewind, Siemens S7; includes Atlas slitter and spare parts.

Used 450mm Custom Laboratory Calender Line equipped with 1200mm maximum diameter single position unwind, 2-roll calender stack on rails (hot oill heated, 149mm roll diameters - one engraved, one smooth), 1200mm maximum diameter single position rewind.

Used Bruckner 3-Layer BOPP Film Extrusion Line equipped with three (3) extruders (90mm coex extruder with 3-components dosing system

Used Una Dyn model MB Megablender 4-Part Gravimetric Blender, a batch type blender equipped with vacuum loader and 3 HP vacuum power unit (460V/3Ph/60Hz).

Used SML CAST COEX 7 seven-layer cast film extrusion line for LLDPE stretch film, 2500mm working width, 4600 kg/h nominal capacity, 12–70 micron, with seven extruders (six 75mm, one 90mm, Doteco gravimetric dosing), automatic profile control die, double chill roll unit with beta-ray gauges, winder, palletizing, and full in-line EREMA recycling loop with 8th extruder

Used Weima model WLK18 Shredder, a 90" wide shredder, complete with infeed and outfeed conveyors, control cabinet, and 2 x 120 HP motors (460V/3 Ph). New in 2006. Retooled and tested in 2012.

Used 1200mm CMG PVC Cling Film Blown Film Extrusion Line equipped with gravimetric/volumetric material feeding and blending system with overhead hoppers, single-layer extruder with 120mm single screw, blown film die head with air cooling ring, collapsing frame and haul-off unit, double back-to-back rewinder, 1200mm film width, chiller included (4,000 m³ capacity, 56 kW cooling capacity). Maximum output: 180 kg/h.

Used 1.25" Wayne extruder, 24:1 L/D, 25 pph max output @ 125 rpm (5–10 pph normal), 5 HP motor, drives and temperature controls in portable cabinet, 575°F max temperature, 6500 psi max pressure, 3 barrel heat zones, air-cooled, mounted on steel plate.

1998 Bruckner 3-layer BOPP film extrusion line, 6,600 mm working width, 280 m/min max speed, up to 2,000 kg/h output, with cascade main extruder, Simplas auto-profile die, thermal-oil MDO/TDO, turret rewinder, Atlas 11-station slitter, and Erema recycling unit.

2005 Bruckner 3-layer BOPP film extrusion line, 8,200 mm working width, 425 m/min line speed, up to 4,000 kg/h output at 25 µm, with twin-screw B extruder, automatic die, MDO/TDO stretching, turret rewinder, and Atlas 12-station slitter.

2003 DMT five-layer co-extrusion film line with five Mitsubishi extruders (5,900 kg/h total output), EDI 5-layer die, MDO/TDO orientation sections, EGS thickness gauging, Softal top and bottom corona treaters, 6.6 m winder width, 390 mpm line speed, and 14.9 KT nameplate capacity.