Browse other used equipment for sale from Margot Machinery, including surplus industrial machinery and support equipment for a wide range of applications. Request a quote or contact margotsales@margot.com to check availability — inventory changes frequently and we can source specific equipment on request.
Enercon Compak 60 in corona treating system, 10 kW, with LM3732-10 power supply (240 V, 3-phase input), LM3728-342 treat station with covered treater roll and segmented electrode assembly, two TF1003 11 kVA high-voltage transformers, LM3616-18 station diagnostics enclosure, and separate watt density control.
2010 Lantech Q300 semi-automatic turntable stretch wrapper with 65" diameter turntable, 80" max wrap height, 72" max load diagonal, 4,000 lb load capacity, 200% pre-stretch, 20" film width, and up to 12 RPM variable turntable speed rated for 25–35 loads/hr; 120V single phase.
Used 2010 PEMCO Wrapmatic GRM automatic ream wrapper, year 2010. Mid-speed ream wrapping for metric and standard U.S. ream sizes including half-ream packages. Ream width 420 mm minimum to 1400 mm maximum. Ream length 297 mm minimum to 1000 mm maximum. Ream height 15 mm minimum to 80 mm maximum. Maximum stack height 1800 mm. Maximum speed 15 reams/min. Hot melt adhesive system
Used 71" Kusters calender, a 2-roll calender with 71" face x 14" diameter rolls, lead-in/out idlers, two 8" diameter cooling rolls, 1030 PLI maximum, mechanically driven with gearmotor on each roll, hot oil heater system, macro M/N 310-0560-1.
Used 71" Kusters calender type 212-40-1525, 2-roll embossing calender with two 71" face x 14" diameter embossing rolls, lead-in/out idlers, two 8" cooling rolls, gearmotor drive on each roll, 1030 PLI max; includes Carrier 30HK chiller for cooling rolls and HTT WTE 09-3-75-1 heater (75 kW, 300°C max) for calender rolls.
Used Kusters Calender, a 2-roll calender equipped with 86`` face x 14`` diameter rolls, two (2) 8`` diameter cooling rolls, 1000 PLI maximum, lead in/out idlers, hydraulic unit, controls, hot oil unit, mechanically driven with gearmotor on each roll.
Used Quickdraft model MH456 Trim System equipped with a 5 HP AC motor (208-230/460V) with Allen-Bradley motor starter, intake silencer, venturi (4" in/6" out), 6" diameter 90 degree large radius elbow, and a 4" diameter 90 degree small radius elbow.
Used Enercon 60" wide Single Side Bare Roll Corona Treater. 60" wide x 7" OD lead in and lead out rolls.r
