Browse used converting machinery for sale, including slitters, sheeters, rewinders, core cutters, and finishing equipment from Margot Machinery. Request a quote on any machine or contact margotsales@margot.com with your web width, material, and speed requirements. If we don't have it in stock, we'll source it.

2003 60" Nordmeccanica phantom axis turret rewind with 40" maximum rewind diameter, automatic two-direction non-stop roll change with splicer, lay-on roller, dancer tension control, 6" core shafts and 1,480 fpm mechanical speed. Drives and controls not included.
Robart International RG 2250 V single knife roll slitter, CE 2017, SN 50100797. Rolls up to approx. 86 in wide, 4-jaw chuck headstock, Bonfiglioli Vectron Synplus variable speed drive with forward/reverse, guarded circular knife on handwheel carriage with digital position readout and lock, nylon roll guide, E-stop. 110 V, 0.75 kW, 3-prong plug. Approx. 660 lb. Well maintained and fully working; demo under power available.

Used 82" PCMC two-position phantom-axis turret unwind, up to 48" max diameter, shaftless with 6" chucks, independent arms, regenerative drives, dual direction splicer, speeds up to 1800 FPM.

Used Black Clawson Turret Rewind. Equipped to handle 50" maximum diameter rolls, and equipped with 3" & 6" diameter air shafts, roll changer for automatic operation, operator console. two motors but no drives are included.

Used 88" Beloit Automatic Turret Rewind, a shaftless turret rewind good for 60" maximum diameter rolls

Used 60" Stanford 252 FW reversible salvage rewinder/doctor machine with 30" unwind and 30" simplex rewind (3" lug air shafts, rider rolls), Dynaweb dancer tension control with taper, Fife CDP-01 edge guide, razor-in-grooved-roll slitting, 2000 FPM, 20 HP Yaskawa V1000 drive, 460/3/60, Allen-Bradley MicroLogix PLC.

Used 16" Rotoflex model VIR400 reversible inspection rewinder with 36" maximum diameter unwind (6" cores), splice board with pneumatic clamping, E&L edge guide, Control Techniques drive, Guardstar light curtain safety system, 460V/3Ph/60Hz.

Used 16" Custom salvage rewinder equipped with 20" diameter cantilevered unwind with 3" chucks

Used Stanford model 142 LT doctor machine/salvage rewinder with 30" cantilevered unwind, Fife edge guide, razor-in-grooved-roll slitting, and 24" cantilevered rewind.

Used 67" Fischer & Krecke Turret Rewind, a non-stop automatic turret rewind good for maximum 67" wide by 40" diameter rolls

Used Appleton model 81010 core cutter for 120" x 3" diameter (ID) cores with pedal controlled cut and manual core advance.

Used 67" Fischer & Krecke Turret Unwind, a non-stop automatic turret unwind good for maximum 67" wide by 40" diameter rolls

Used 2500mm Laem duplex center slitter, upgraded by Siemens in 2022, with 1000mm shaftless driven unwind (75mm cores), 250mm minimum slit width, 1000mm rewinds with independent arms (75mm and 150mm cores), Siemens AC motors, ABB drives, Siemens PLC/HMI; runs BOPP, polyester, CPP film and paper; 650 mpm max speed.

Used 2500mm Laem duplex center slitter with 1200mm shaftless unwind (75mm and 150mm cores), web guide, 350mm minimum slit width, 1000mm rewinds with independent arms (4 stations), Siemens S7 PLC, 90–400 N tension; runs PET, BOPP, LDPE and CPP film; 800 mpm max speed.

Used 69" NDC Model 8100 TDI Infrared Web Gauge System. Sensor Type: NW 710s

Used 6700 mm DSI two drum winder, an automatic geotextile slitter rewinder good for ~6700mm web width, and equipped with shear slitting, an approximately 1320mm maximum diameter rewind, auto core loading, auto length measuring, roll kicker, doffing table, and roll wrapper.

Used 80" Dusenbery two-drum winder Model 840 MH with 60" Martin shaftless unwind, Fife P100 edge guide, 42" diameter rewind, DFE tension control, shear slitting, 87" winding drums, steel rider roll, 20 HP Emerson DC drive, 480/3/60.

Used 1300mm Karlville Model HS-Pro-1300 duplex center slitter, 50mm minimum slit width, 1000mm unwind roll diameter, razor and pneumatic shear with tangential web path, max 1200 kg, 0.5–2.5 pli tension, 76mm/152mm cores, 500 mpm max speed, 610mm max finished roll diameter; runs PE, PP, PET, PVC, paper and laminates.

63in Dimatra cardboard core cutter, year 2025. Enclosed cutting hood with hinged clear guard, motor drive at the infeed end, tubular steel support frame, operator control panel with pushbutton controls, and a separate free-standing electrical control cabinet with cooling fan

Used 70" Stanford 2038HC duplex center slitter with 40" shaftless roll-lift unwind (3" cores), Fife edge/web guiding, splice board, dancer tension control, shear slitting with individual knife holders, 32" cantilevered rewinds (spacerless shafts, roll pushers, full-width layon rolls), indexing roll unloading tree, 2-motor DC drive (50/15 HP), 480V/3Ph.

Used Holweg RS-26 paper bag machine with 900mm x 1250mm diameter unwind, glue system (hot melt back seam, paste glue pinch bottom), film window section; cut length 220–760mm, bag height 165–745mm, bag width 100–380mm; runs 25–100 gsm paper, 800 bags/minute max; includes some spares.

MarquipWardUnited Sheet Wizard 1650 dual rotary sheeter, year 2010, serial number S/N69515. Maximum sheet width 1650 mm, optional reel width 1700 mm, maximum reel diameter 1850 mm, maximum reel weight 3410 kg. Core diameter 76 mm minimum to 305 mm maximum. Maximum speed 335 m/min

70" wide 2-position unwind. Handles 42" diameter rolls. Re CX250 pneumatic brakes, safety chucks, SMC electro-pneumatic tension control, Maxcess WINertia idler, Re web-guide display, and Simco-Ion static neutralizing system.

Used 6670mm 2002 Atlas Valmet Duplex Center Surface Slitter. Equipped the 1200mm diameter shaftless unwind, overhead web transfer shear slitting section, dual rewind position with radially off loading, 1200mm diameter individual arm rewind positions.

Used 3300mm Atlas Model CW812 duplex center surface slitter with 1500mm shafted driven unwind (1200mm at 3300mm web width), edge guide, anti-static bars, Demag hoist crane, splice table, shear slitting section, 1200mm heavy-duty rewinds with individual arms, two motorized edge trim rewind stations, hydraulic power unit, SICK safety light barriers, 800 mpm max.

Used 2024 CONVEQ Maxi Slit 1850 single-shaft slitter rewinder by Llorens-Planas S.L. Handles 600–1850 mm (23.6"–73") web widths, 1500 mm (59") max reel diameter unwind and rewind, and 3000 kg (6,600 lb) max reel weight.

Used 30" Stanford model 628 LS duplex center slitter with 32" unwind (3" air shaft, brake), Horton automatic tension control, Fife edge guide with CSP-01 controller, razor-in-grooved-roll slitting, 26" rewinds with Tidland slip differential shafts (3" cores, lay-on rolls), 2-motor drive.

MarquipWardUnited Sheet Wizard 1850 dual rotary sheeter, year 2009, Maximum sheet width 1850 mm, optional reel width 1900 mm, maximum reel diameter 2100 mm, maximum reel weight 3410 kg. Core diameter 76 mm minimum to 305 mm maximum. Maximum speed 335 m/min.

Used 2100mm Parkland duplex center slitter Model SM150 Series 2 with 1000mm shaftless single-position unwind with roll lift, dual disc brakes, automatic tension control, edge guide, splice board, rotary shear slitting, 800mm duplex rewind with 76mm differential shafts, full-width air-operated rider rolls, roll unloading device, Allen-Bradley touchscreen, AC drive system.

Moore & White 1900 slitter rewinder, year 1975, serial number not provided. Reel width input and output 150 mm minimum to 1900 mm maximum. Maximum reel diameter input and output 2100 mm. Maximum reel weight 3000 kg

Used 62" Egan turret rewind with 36" maximum rewind diameter, 3" and 6" air shafts, automatic splicer with air-operated lay-on roll, driven S-wrap pull roll section, driven bowed roll, single-side edge trim, load cell tension control, taper tension, Eurotherm screen, DC motors.

Used 2011 Voorwood Duplex slitter rewinder model, year 2011. Input reel width 305 mm minimum to 1676 mm maximum. Maximum input reel diameter 1067 mm. Maximum reel weight 1360 kg. Core reel diameter 76 mm minimum to 152 mm maximum. Maximum speed 158 m/min. Rewind roll width 25 mm minimum to 1676 mm maximum.

2012 JURMET Master duplex slitter rewinder with 1,800 mm working width, 500 m/min speed, shaftless unwind to 1,300 mm diameter, double-shaft center-driven rewind to 640 mm diameter, and razor blade slitting.

2007 Jennerjahn JLS 84/18 counter roll winder with 1000 mm shaftless unwind, dancer tension control, rotary shear slitting, 450 mm (18") shaftless rewind for 2" and 3" cores, automatic tail cut, tuck, and tabber systems, finished roll conveyor with roll out table, and Allen Bradley SLC 500 controls.

2011 KAMPF Unislit II 625S slitter rewinder with 2,500 mm working width for films and laminates, shaftless hydraulic pick-up unwind to 1,200 mm diameter, center-driven independent-arm rewind to 1,000 mm, razor blade slitting, and optical defect inspection.