Browse used coating and laminating machinery for sale from Margot Machinery, sourcing quality used equipment since 1993. Current inventory includes solvent and water-based coating lines from Rotomec, extrusion coater laminators from Bobst and Davis Standard, solventless laminators from Nordmeccanica, plus coating heads, UV systems, and hot melt equipment from Black Clawson, Kroenert, Nordson, and Sung An Machinery. Every machine is listed with detailed specifications and photos. Request a quote or contact margotsales@margot.com with your web width, coating type, and substrate requirements.
Complete extrusion coating and laminating line running a 1500 mm web at 500 m/min for polyethylene coating or lamination of paper substrates. Includes automatic-splice unwind and rewinder, two Me.ro. corona stations, an LDPE laminating unit with 700 mm chill roll, a 560 kg/h extruder with CLOEREN automatic die head and closed-loop thickness gauge, and a gravure primer coater with gas-burner drying. Component upgrades through 2010. Siemens S7 PLC with Eurotherm 590+ drives.
1000mm Davis-Standard slot die coating line for 25 - 75 µm siliconized PET, 1,000 mm maximum web width, 20 m/min line speed, Series 1000 flex-lip slot die coater with two dies, 24.4 m multi-zone electric dryer, NDC X-ray gauging, interleaf unwind, and Allen-Bradley drives and safety PLC.
Used Sung An Machinery (SAM) coater laminator (clean-room located), 6"–30" web width, 3–110 FPM, 5–150 lbs tension, with 30" primary and secondary phantom-axis turret unwinds, 1.5 kW Enercon corona treater, cartridge coating head with four trolleys (dual Mayer rod, slot die, 2-roll gravure, knife-over-roll), 24-foot 6-zone flotation dryer, Glenro 20 kW IR heater, heated/chill roll laminator section, razor edge trimming, 30" turret rewind, explosion-proof coating motors, Siemens PLCs/HMIs, and 415/3/50 power.
1995 Rotomec Rotopak 3000-S solvent/water-based coating line, 1,010 mm working width, 425 m/min, 4 reversible stations with register control on line shaft drive, turret unwinders and rewinder, steam-heated double-hood dryers, Allen Bradley PLC.
1995 Rotomec Rotopak 3000-S solvent/water-based coating line, 1,010 mm working width, 425 m/min, 3 reversible stations on line shaft drive, turret unwinders and rewinder, steam-heated double-hood dryers, Allen Bradley PLC.
1999 Rotomec Rotopak 3000-3ES solvent/water-based coating line, 1,220 mm working width, 450 m/min, 2 stations (1 reversible, hotmelt capable) with independent drives, turret unwinders and rewinder, steam-heated double-hood dryers, Siemens PLC.
2002 Rotomec Rotopak 3000-S solvent/water-based coating line, 1,220 mm working width, 525 m/min, 3 stations (2 reversible, 1 hotmelt) with independent drives, turret unwinders and rewinder, steam-heated double-hood dryers, Siemens PLC and drives.
Bobst Rotoextruder 700F 1750/800 extrusion coating and laminating line, 1750 mm web width, 750 m/min operating speed, with two shaftless duplex unwinders, water-based primer coater, gas-fired dryer, Reifenhäuser 120 mm and 100 mm coextruders, Cloeren 3-layer feedblock and autogauge die, duplex rewinder, and Siemens/Cosmoline PRO controls.
Used 53" Uteco coater laminator model Horizon D/TH 130 with 40" turret unwind, two Enercon corona treaters, gravure coater with newer chambered doctor blade, 25' 2-zone arch dryer, secondary 40" turret unwind, laminator, 32" turret winder with auto splice, AC drives, new PLC, edge guide and brakes, 400/3/60.
Used S.A.M. extrusion coater laminator (2000), 1300mm wide, with two gravure coaters with double drying hoods, two extrusion lamination units (90mm extruders, 2023 Cloeren dies, gravimetric blenders, ~1000mm chill rolls), three turret unwinds and turret rewind with flying splice, three Mero corona treaters, two NDC beta-ray gauges, PLC/HMI upgrade through 2025.
1996 Nordmeccanica Triplex Combi laminator with 1,100 mm working width and 300 m/min speed, featuring three turret unwinders, turret rewinder, two interchangeable-trolley coating units (gravure and solventless), four independent vertical drying hoods, 2-component solventless mix unit, and Dr. Schenk quality control (2019).
Used 62" Black Clawson coating head equipped with a roll out cartridge for three roll or Mayer rod coating. Includes mechanical drive stand with three (3) 3 HP AC motors. Additional cartridges available.
Used 62" Black Clawson coating head equipped with a roll out cartridge for three roll or Mayer rod coating. Includes mechanical drive stand with three (3) 3 HP AC motors. Additional cartridges available.
2021 90" New Era coating, laminating and embossing line for film/fabric/film constructions, 61 - 90 in web width, twin direct-gravure solventless coating stations, 36 in preheat drum, hydraulic embossing nip to 500 pli, turret unwind and winder, Allen-Bradley ControlLogix safety PLC and PowerFlex drives.
Used Thank-Metal Laboratory Coater (Chibi Coater) for coating metal foil, and equipped with 200mm diameter unwind with Electromagnetic brake, knife over roll coater, 300mm long electrically heated oven (200 degrees C max), 200mm diameter rewind. Speed: 0.03 - 0.3 mpm.
Used 20" Arrow Converting Equipment UV silicone coating line with 40" cantilevered unwind (Montalvo brake, taper tension control), Coast Controls edge guide, 3-roll offset gravure coater with chambered doctor blade, Fergesen FDN-20500D 3-lamp UV dryer (500 WPI), S-wrap cooling section, score slitting, 40" cantilevered rewind, Eurotherm drives, Allen-Bradley PLC/HMI, 240VAC/3Ph.
Used Kroenert 3-roll offset gravure coating head with 67.750" gravure roll (8.5 BCM, 15 HP), 71" chrome backing roll (40 HP), EPDM/urethane transfer roll, Harris & Bruno enclosed doctor blade with three hopper heads, Magnetek DC drives, 45 fiberglass sleeves, six ceramic gravure rolls, Graymills pumps, Myers mixers, consumption scale; no PLC or HMI.
Used 15" Sterling lab extrusion coater laminator with 30" Pinnacle single-position unwind (roll lift, AccuWeb edge guide), laminator (20" chill roll, rubber-covered nip roll, backup roll), Sterlco units, two 8" secondary chill rolls, 20" secondary unwind, 36" rewind, 2" Sterling carriage-mounted extruder (25 HP, 30:1 L/D), no drives.
Used 2400mm Nordson BC 62 porous coat system coating head for random pattern hot melt adhesive coating on breathable materials, 0.85–60 gsm, 1400mm–2400mm width (reducible to 500mm), with FC 1260 coating stand, 12-zone applicator with 24 heads, BM 200 bulk melter, MX 44110 melt-tank, GP 200-12/4 metering pumps, Siemens PLC, Lenze drives, 400V.
Used Fusion UV Systems model DRW-50QNH 50" wide UV curing unit with five 10" microwave-excited UV units (6000 watts/inch), Delta F oxygen analyzer, reaction chamber with UV shielding, nitrogen delivery for inert irradiation, quartz filters, pneumatic clamshell web handling; reportedly under 200 hours use.
Used 14500mm Sung An Machinery extrusion coater laminator with three 1300mm automatic bi-direction turret unwinds, two Mero corona treaters, two gravure primer coating units with double driers, extrusion coating unit (90mm extruder, Cloeren die), 3-layer coextrusion unit (Cloeren die, two Maguire blenders), two Thermo Fischer beta gauges, 1300mm turret rewind, 300 mpm max.
Used 62" AGL 64 industrial laminator with three integral unwinds (30", 24", 18" max diameter), transducer tension control, Magpowr Cygnus edge guide, 64" x 10" silicone-covered internally heated laminating rolls (50 Shore A, 10,000W each), 36" rewind with taper tension control, safety light curtain, 220V/1Ph, 80 fpm max.
Used SML-Starlinger extrusion coater laminator with 1500mm dual-position unwind, extrusion lamination section (75mm extruder, 28:1 L/D, 1150–1700mm die), laminating nip, 1500mm center surface rewind; PP, PE, additives; 1550mm max net width
Used Nordmeccanica Triplex Combi coater laminator, manufactured 1994 with 2021 controls renovation, 1280mm web width, 300 mpm max speed, three 1000mm turret unwinds, 1000mm turret rewind, gravure and solventless trolleys, two double drying hoods, 2-component mixing unit, two Vetaphone corona treaters, Allen Bradley PLC.
